Operation and Maintenance of Spiral Classifier
a) The machine must be started with no-load. The spiral axis should be lifted at first, when the operation is steady, then lower the spiral axis slowly until proper position.
b) When the machine is in repairing, the spiral axis must be lifted in order to prevent infiltration of ore pulp to the sealing parts, even more damages to the equipments in the future.
c) The bearings of both speed reduction device and both sides of the spiral axis should be lubricated with oil grease each definite time of operation time.
d) The machine needs to be shutdown immediately if any unusual noises have been found, and eliminating faults to ensure smooth operation in the future.
Contact: Rain Huang
Phone: +86-155 3715 6339
Company: Zhengzhou Desen Environmental Technology Co., Ltd